Gas Clip Technologies Multi Gas Clip Simple, 4 Gas
NEW 4 GAS DETECTOR with 2 YEAR RUN TIME
Gas Detection Made Simple
- No charging ever! No calibration needed!
Detects H2S, CO, O2 & combustible gases (LEL)
Save time never having to charge or service your portable multi-gas detector!
Reliably test for H2S, CO, O2 & combustible gases (LEL)) with this simple-to-use & simple-to-maintain detector.
Just turn it on & have worry free assurance of protection against toxic gases 24/7 for two full years.
Gas Clip Technologies’ continued development and refinement of advanced low-power photometric infrared technology for LEL measurement helps make gas detection simpler than ever in the newest member of their gas detector family - the Multi Gas Clip Simple.
No charging ever.
No calibrating needed.
2 year runtime - 2 year life!
No charging ever! No calibration needed!
Simple One Button Operation
Works in oxygen enriched and oxygen deficient environments
LEL sensor is immune to H2S & silicone poison
Assembled in USA
Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock
Size: 4.75” H x 2.75” W x 1.25” D (120.65 x 69.85 x 31.75 mm.)
Weight: 7.675 oz. (220.2 g)
Temperature: -40˚ to +122˚F (-40˚ to +50˚C)
Humidity: 5% to 95% RH (non-condensing)
Battery Life: 730 Days continuous (based on avg. of 1.5 min. of alarm/day)
Alarms: Visual, vibrating & audible (minimum 95 dB).
Low, High, STEL, TWA & OL (Over Limit)
LEDs: 4 Red alarm bar LEDs,
Yellow back-light (activated on button press),
Red back-light (activated on alarm condition),
Yellow Maintenance Notification LED
Display: High viewing angle alphanumeric Liquid Crystal Display (LCD)
Logs: 25 Bump tests,
Continuous 1 second data logging (typical capacity >2 months)
Tests: Full function self-test upon activation,
Sensors, battery and circuitry tests run continuously
Ingress Protection: IP 68
Approvals: See attached Data Sheet