ERB Tectra Hard Hat, 6pt Rachet Suspension, Non-Vented
Tectra™ Safety Caps
Elvex proudly introduces a new advanced safety helmet that challenges the traditional appearance and functionality of safety caps.
Non-Vented ONLY (Please Call 877-844-3101 if the options and colors you need are not advertised)
Six point Suspension
Ratchet
Close-Out, Limited Stock Available, Stock available is marked.
A quick summary of design elements and features:
A striking contemporary design - good balance between a traditional shape and a modern and appealing design
A lightweight Polypropylene shell
Four head hugging suspensions
Vented and non vented versions
Non conductive and general versions
Hidden suspension hangers
Rain trough for water disbursement
Contour at ears to accommodate hearing protection
Accessory slot (30 mm)
Suspension:
The most important aspect of a safety helmet suspension is that it holds the helmet securely on the head.
The head-hugging suspensions of the Tectra helmet have a lower center of gravity than what is offered on other safety helmets.
This lower center of gravity results in a very secure feeling of a helmet that stays on the head.
Six point ratchet suspension Only. (Call 877-844-3101 for 4 Point or Pin-Lock Suspensions)
All suspensions have three height adjustments.
Non-Vented
The Tectra helmet is available in Vented and Non-Vented versions. (call 877-844-3101 for vented options.)
The vented version has eight ventilation holes at the crown of the helmet.
On the non-vented version the ventilation holes are permanently closed, and look like cosmetic decorations.
NON-Vented helmets meet Class E (electrical) requirement of ANSI Z89.1-2009.
Types and Classes:
Tectra is a Type I helmet, meaning that it is designed to provide protection from impacts to the top of the head.
There are three classes of helmets: Class E (electrical) is rated 20,000 Volts, Class G (general) is tested to 2,200 Volts, and Class C (conductive) are not intended to provide protection against electrical hazards.
The Tectra helmet complies with ANSI Z89.1-2009 requirements for a Type I helmet.
The non vented version complies with Class E, G and C, and the vented version complies with Class C. Certification to CE EN 397 is pending.
Designed for accessories:
The Tectra helmet is designed to work with accessories and comes with a standard 30 mm slot.
It works with Elvex hearing protection and face protection.
Use any of our four cap mount muff models, with suffix 29 or 30, such as HM-6029 or HM-6030.
Use visor bracket model VB-30, in combination with any of 20 different face shields and wire mesh visors.
Please Call 877-844-3101 or Use the Contact Us page for accessories and/or other options by Elvex.
WARNING - This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
