In order to keep your fleet of gas detectors compliant with specific settings, we allow for the MGC Dock to program each unit during either bump testing or calibration.
The programmable fields are as follows: User ID, Calibration Interval, Bump Interval, Self-Test Interval, Low Alarm, High Alarm, Show Sensor Readings, Hide Bump Due LED and Hide Clock.
For example, if your company or facility requires each detector on site to have specific alarm set points and a bump test interval, instead of programming each unit individually, the instruments can be group programmed while simultaneously bump testing (4 units at a time per dock) using our GCT Manager software.
As firmware updates become available, we can program each MGC Dock to update units during bump testing and calibration.
Facility safety standard compliance for single gas detectors is now easily achievable.
Event Data and Record Storage:
In addition to performing tests, unit configurations and firmware updates, the MGC Dock also stores important information about both the docking station and units tested.
All tests performed on the docking station can be accessed from either the USB directly or using the GCT Manager software.
Each bump test and calibration event is recorded and logged by date, time and serial number.
Along with the test records, the individual event logs from each unit are saved.
At the time of the test, the detector transmits its’ event log to the memory.
By default, the station will save the previous 10 event logs.
Wall Mount MGC Dock:
Gas Clip Technologies offers a wall mount solution for their MGC Dock.