• V-Gard Cap Style Hard Hat with Fas-Trac Ratchet Suspension
• Standard Size (6-1/2 to 8 inches) 
• Slotted Cap
• V-Gard Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and also as outlined in CSA Z94.1-2005 (Class E) with Fas-Trac Suspension.
• V-Gard Caps meet the voluntary standard for low temperature and reverse donning as prescribed by ANSI/ISEA Z89.1-2009.
• Some Caps Now available with Fas-Trac® III Suspension

Applications

• Surveying
• Agriculture
• Construction
• Electric Utility
• Hazardous Materials
• Nuclear
• Oil & Gas
• Paper & Pulp

Hazards

• Confined Space
• Electrical Shock
• Overhead Falling Objects
• Splash
• Welding

Option Details:

• Item# 475358, Slotted Cap White, w/Fas-Trac III Suspension
• Item# 475360, Slotted Cap Yellow, w/Fas-Trac Suspension - Limited Supply Available, Qty avail is marked

Product Information:

• Consist of a polyethylene shell and suspension working together as a protection system.
• Cap available in standard size (6-1/2 to 8 inches) - (Small (6 to 7-1/8 inches) and large (7-1/2 to 8-1/2 inches.) can be ordered upon request)
• If you need additional colors or sizes please use the Contact Us page or call us at 877-844-3101

*WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.